Westinghouse 30 Amp Manual Transfer Switch with 8-Circuits

Westinghouse 8-Circuit Transfer Switch

The Westinghouse 8-Circuit Transfer Switch has six single pole 120-volt circuits rated at 15 amps, and two double-pole circuits rated at 20 amps. Each circuit has its own circuit breaker and separate selector switch to choose between utility line power and generator power.

Setup during an outage is simple.

1. Connect the generator to the inlet box with the included generator cord. 
2. Start the generator and move the main generator circuit breaker to the “On” position.
3. At the manual transfer switch, switch the loads one at a time from Line to Generator starting with the heaviest load. Give the generator about 5 seconds to recover when adding a heavy load like an air conditioner or pump motor.
4. When the utility restores power, move the selector switches back to Line. Let the generator run without a load for two-three minutes, then shut it down. Allow it to cool before storing.

Includes a Westinghouse 5-Year Limited Warranty (see Owner Manual).

Product Specifications

Model Number

WMTS30A10C

Manufacturer

Westinghouse

Rated Amps

30 Amps

Voltage

120/240 Volts

Enclosure

Powder Coated Steel Transfer Switch, ABS Inlet Box

Type

Manual Transfer Switch

Transfer Switch Model

WMTS30A10C

Features

Weight

25 Pounds

Dimensions

11.1L x 5.2W x 19.8H inches

Warranty Information

Consumer Warranty

Westinghouse 5-Year Limited Warranty

Transfer Switches

Transfer Switch Model

WMTS30A10C

Transfer Switch Amps

30

Transfer Switch Circuits

8

Ats Poles

2

Transfer Switch Weight

25 Pounds